Sponsored Content
Sign Up To Join Us Now!
c
does anyone know if it is possible to make set of 68-77 t-tops fit a 78-82 corvette i need a set for my 79 and can get set from older car cheap . 

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
v
Free Member
Send PMHAMPTONVILLE, NC - USA
Joined: 11/5/2001
Posts: 169
Vette(s): 1978 INDY PACE CAR #3016 of #6502 built. Has original Pace car decals still in GM boxes the way it was delivered to GM dealers. per NCRS "UPDATE" Decals applied as of 3/8/02 (ALL ORIGINAL)
Cvettlovr, I am pretty sure the tops will fit. What you need to do is when you get the t-tops, also replace the hardware that fastens the tops to the car.You can use the original rear strikers on the tops if you change your rear striker plates on your 79 vette.
Doug
|UPDATED|12/31/01 8:24:59 PM|/UPDATED|
Doug

|UPDATED|12/31/01 8:24:59 PM|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
E
The tops will swap. You will have to change out the hardware. Take it slow. There is a tapping plate behind each of the rear latches on the halo panel. If you remove both of the attaching screws at the same time, the tapping plate will drop to the bottom of the car. If that happens, you have no choice but to remove the interior trim and fish them out. Trust me. Been there, done that.


Be the first to like this post
Sign In to Like this post
Sign In to Like this post
v
Free Member
Send PMHAMPTONVILLE, NC - USA
Joined: 11/5/2001
Posts: 169
Vette(s): 1978 INDY PACE CAR #3016 of #6502 built. Has original Pace car decals still in GM boxes the way it was delivered to GM dealers. per NCRS "UPDATE" Decals applied as of 3/8/02 (ALL ORIGINAL)
There seems to be some confusion here. I think replace the hardware and change out the hardware are the same thing.
Easy Mike, by the number of your recent posts let me be the first to nominate you for the C3VR Tech Job.
-
-
Doug
|UPDATED|3/15/02 10:45:16 AM|/UPDATED|
Easy Mike, by the number of your recent posts let me be the first to nominate you for the C3VR Tech Job.
-
-
Doug|UPDATED|3/15/02 10:45:16 AM|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
E
Vettelooker -- I respectfully decline the office of C3VR Tech. I've just been fooling with Corvettes longer than some folks and have learned lots of things the hard way.


Be the first to like this post
Sign In to Like this post
Sign In to Like this post
v
Free Member
Send PMHAMPTONVILLE, NC - USA
Joined: 11/5/2001
Posts: 169
Vette(s): 1978 INDY PACE CAR #3016 of #6502 built. Has original Pace car decals still in GM boxes the way it was delivered to GM dealers. per NCRS "UPDATE" Decals applied as of 3/8/02 (ALL ORIGINAL)
Sounds good to me Easy Mike. you da man!
-
- Doug

-
- Doug

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content
