Sponsored Content
l
Free Member
Send PMEdmond, OK - USA
Joined: 7/26/2005
Posts: 9
Vette(s): 1971 T-top, 350, auto, average condition mechanically. Needs paint.
Hello everyone! I have recently had Redline Gauges rebuild my tach in my '71 to electronic. I have also switch my ignition system over to the MSD with the 6al box. I cannot figure out how to hook up the electronic tach to the MSD system to make it work. Any help would be appreciated! The tach has 3 wires coming from it now. Thanks!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
The three wires are ignition power, ground, and tach signal from the ignition. The MSD should have a tach connection for the last wire.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
l
Free Member
Send PMEdmond, OK - USA
Joined: 7/26/2005
Posts: 9
Vette(s): 1971 T-top, 350, auto, average condition mechanically. Needs paint.
Thanks for you reply. One last question....since my Vette didn't originally come with an electronic tach, what do I do with the ignition power wire? Thanks again, kster!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Insert the ign power wire either into the fusebox on a "hot in run" position, or connect it to the wire going to the MSD box to power it up with the key on. If you have the MSD directions, is should say. If not, I think Dwain(longhorn294) has the instructions.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content