Home page

stock radio help

Forum: C3 Electrical, Body and Interior

5 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

stock radio help

Posted: 6/11/07 12:17pmMessage 1 of 5
l
Former Member
Send PM
greenwood lake, NY - USA
Joined: 5/11/2007
Posts: 14
Vette(s): 1969 corvette convertible 350-350 4spd
i just bought a stock 69 radio and it came with what looks like a amp that plugs into radio. there is another wire harness that comes out of radio. what is that??? for the speakers?? how would i wire to speakers if that is what it is? please help...thanks in advance,brianConfused
Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

stock radio help

Posted: 6/11/07 2:18pmMessage 2 of 5
Profile Pic
Free Member
Send PM
Frederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
The radio is in two pieces. The heat sink part is the amplifier...the tuner section is little more than just a tuner. The amp section attaches to the bulkhead behind the passenger side of the dash.

Without having it front of me to verify, you will have one wire harness connecting the tuner to the amp. You'll also have another harness that contains a power lead for the tuner and it's illuminating light, a ground and wires to the speakers. I'm not sure, but the amp/heat sink may well have a power lead and ground as well but those may run in the harness between the two units.
Be the first to like this post
Sign In to Like this post

stock radio help

Posted: 6/11/07 2:31pmMessage 3 of 5
l
Former Member
Send PM
greenwood lake, NY - USA
Joined: 5/11/2007
Posts: 14
Vette(s): 1969 corvette convertible 350-350 4spd
`i think its 2 green wires and one black.. 2 powers and 1 ground?
Be the first to like this post
Sign In to Like this post

stock radio help

Posted: 6/11/07 7:14pmMessage 4 of 5
T
Free Member
Send PM
East Hanover, NJ - USA
Joined: 9/25/2004
Posts: 525
Vette(s): '68 Black Conv. Matching 327/300 4 Spd. P/S, P/B, P/W, Tele, A/C
Brian,
 
For my '68, the flat 3 spade connector w/ the black (ground), gray (light), & yellow (power) is for the radio's power from the fuse block.
 
The amp harness is 2 on 1 spade connector with yellow, blue, & green wires.
 
Each front speaker has a black & green wire with a connector that I believe plugs into a harness that comes out of the radio, but that part is missing from mine.
 
Hope this helps,
 
Anthony
Be the first to like this post
Sign In to Like this post

stock radio help

Posted: 6/13/07 9:13amMessage 5 of 5
l
Former Member
Send PM
greenwood lake, NY - USA
Joined: 5/11/2007
Posts: 14
Vette(s): 1969 corvette convertible 350-350 4spd
thanks guys!
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Electrical, Body and Interior


Sponsored Content