Sponsored Content
Hod to fix my driver seat. A wire started to push a hole through my leather in the front right side.
I pulled the cover off to find that the small wires holding the seatcovers down to the foam had all broke off and the wire that they were attached to had started to work its way out the front. I figure it was a good time to switch the seat bottom with the passanger side while I was at it to even out the ware. Been about 14 years since I had the Al Knox seatcovers and foam installed and they still look good except the color has fadded a little. I plan to re-color them if I can find somewhere to get the color matched.
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Dewitt radiator and dual electric fans
Borgeson Steering box
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content