Sponsored Content
I'm looking at replacing the rocker panels on my 71. I really want to find original or good aftermarket. No foreign junk. I've checked the major online Vette sites. My question is has anyone had experience with this and who makes good ones? Thanks, Terry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
g
Lifetime Member
Send PMIrving, TX - USA
Joined: 8/21/2004
Posts: 4286
Vette(s): #1 -1969 Corvette Coupe Riverside Gold, black interior,MN,A/C,350/350,PS,PB,window cranks.
#2 -2000 C5, black/black, 6 sp, Bose system & lots of buttons.
If ya' want a real one, would you mind a used one from a Corvette Junkyard? Might be cheaper and it will be GM, just a thought. 
�����
My Link 
MICK - C3VR Lifetime Member #113
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Rocker panels, or rocker moldings?
Paragon has some really good quality moldings...
Paragon has some really good quality moldings...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
E
I saw the price of the aftermarket stuff and that is when I decided to polish mine. I used a scotch brite pad on my die grinder and took the anodized finish off and also at the same time worked most of the dings and dents out of the panel. I then used different grits of sandpaper and worked my way up to around 1600 grit. I used wet sandpaper to keep it all clean and neat. I started with around 300 or so. When I got up to 1600 I broke out the Mothers and went to work. You could also polish them on a bench grider with some rouge and they would be even shinier.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Painted mine flat black the first year I got the Vette.
Save the Wave!
Support the National Corvette Museum
Support the National Corvette Museum
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I am sending you mine Terry, now that you have practised on yours and know what to do. 
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Dewitt radiator and dual electric fans
Borgeson Steering box
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
[QUOTE=Redwingvette]I am sending you mine Terry, now that you have practised on yours and know what to do. [/QUOTE]
[/QUOTE]
Send it over Brian. I'll have her done in 1-2 years. I am talking abot the rocker moldings. One has a pretty good dent in it. I tried to take it out. It looks better but not the way I'd like. The vette catalogs are all around the same price $269 pr. They're probably all made by the same company?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content