Sponsored Content
m
Lifetime Member
Send PMEquinunk, PA - USA
Joined: 10/31/2007
Posts: 2573
Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.
I have a 72 convertable. There is a chrome catch/latch in the center just inside the top. Is this for a hard top attachment? I have seen other like years, 71,72, and do not see this on them. The tank sticker shows it came with a black hard top. Are there differences in the top from year to year? Does anyone have one to part with. THANKS
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Mine has a latch that releases the deck lid and another one that releases the 2 pins that go through the deck lid from the top.
Lonnie
(duplicate post deleted)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
6
[QUOTE=manchestershark]...I have a 72 convertable. There is a chrome catch/latch in the center just inside the top...[/QUOTE]
Post a pic. I think you are referring to a ferrule on the deck lid and not a latch. If it is a ferrule, some of the removable hardtops had a bracket along the bottom and used the ferrule with a thumb nut as an addtional mounting point. Not all cars have the ferrule in the decklid and not all hardtops have the mount.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
I'm thinking the same thing about the mount/ferrule for the center bolt of the hardtop. Some got it, some don't, which means also that some decklids had the hole/ferrule, some didn't.
I believe there is a U-shaped bracket that fits over the bolt/stud(on the hardtop) from the bottom(under the decklid), and then the nut tightens up on that to hold the center of the hardtop down snug against the decklid.
I believe there is a U-shaped bracket that fits over the bolt/stud(on the hardtop) from the bottom(under the decklid), and then the nut tightens up on that to hold the center of the hardtop down snug against the decklid.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Former Member
Send PMMounds View, MN - USA
Joined: 5/24/2007
Posts: 1034
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
Hardtops in '68 did not have chrome protectors in the rear corners, and used smaller hold down studs, but can be used on a later car. All 69-75 hardtops are interchangeable.
We have a 69-75 top in stock that does not have the center stud. It has a black vinyl top. Call or PM if you are interested.
Larry
Corvette Specialties
763-784-8577
We have a 69-75 top in stock that does not have the center stud. It has a black vinyl top. Call or PM if you are interested.
Larry
Corvette Specialties
763-784-8577
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
6
[QUOTE=VetteSpecialties]...Hardtops in '68 did not have chrome protectors in the rear corners... [/QUOTE]
6880Mike 2008-07-30 06:42:01
Late production '68s got the chrome tips.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content