Sponsored Content
Hello everyone, I was removing the bolts for the rear bumper mounts and noticed a shim plate was missing on the passenger side. I was wondering did the 1975's come with one shim plate per side or some were different. You have a mounting plate and behind that a shim plate. I i'm finally doing the body mounts this weekend and other things Thanks ZAPPAREX
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I looked at my assy manual for 77 only has shims shown on drivers side just like this diagram item 34 

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Bumper ram shims were used "As Needed". Might have some, might have a bunch, might not have any. Just be sure to mark them, and replace the same shims on the same side on re-assembly. 

Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content