Sponsored Content
W
JUST A QUICK QUESTION . WILL SEATS FROM THE YEARS '78-'82 FIT IN MY '76 ? AS IN , WILL THEY BOLT DIRECTLY IN PLACE. OR, AM I LOOKING FOR A WORLD OF GRIEF ? 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
s
Free Member
Send PMThe Woodlands, TX - USA
Joined: 1/27/2006
Posts: 67
Vette(s): 1969 Coupe, Red, L88 Tribute
The seat mounting rails on an '80 seat are 19 inches from front mounting hole to the rear one. If the '76 are the same, they should bolt in.
I just put a set of '80 seats in my '69. The front seat mounts were O.K., but I had to drill new holes because the seat mounting rails were about 2 inches longer. Because the floor is fiberglass, I had to remove the mounting plates and remount them inline with the new hole. It wasn't that hard. Just took a little time.
Steve
SMSCORVETTE
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
e
Lifetime Member
Send PMLanoka Harbor, NJ - USA
Joined: 12/21/2006
Posts: 2191
Vette(s): 1975 metallic blue coupe with t-tops,L48, t/t steering, black leather interior. 1990 L98, white/red leather interior, auto,a/c
there is another post on this and what seats you can install. will see
if i can find it. i am pretty sure to install c4 seats they said you
just had to add a piece of steel about 2 " long. will try to find
other post as it had a link on how to install.
LIFETIME MEMBER #97
THE DYNAMIC DUO
THE DYNAMIC DUO
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content