Sponsored Content
s
Does anyone know who to install a regulator spring for a power window? I have it in but it's not under tension. Window goes down real fast and comes up real slow.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Send PMHot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
my guess is exaclty opposite of how you have it installed. flip it over...
this page has pictures of regualtors with springs installed
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
s
Window regulator problem solved!
I did not have the spring wound properly. This time I put the regulator in a bench vise and wound the spring. With the spring under tension, I install the window motor which held the spring tension while the unit was reinstalled in the door along with the glass. One note, I had to remove the inside and outside weather stripping to make room for everything to go back in.
I did not have the spring wound properly. This time I put the regulator in a bench vise and wound the spring. With the spring under tension, I install the window motor which held the spring tension while the unit was reinstalled in the door along with the glass. One note, I had to remove the inside and outside weather stripping to make room for everything to go back in.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content