Sponsored Content
Lifetime Member
Vette Registry Founder
Moderator
Send PMVette Registry Founder
Moderator
Eagleville, PA - USA
Joined: 11/1/2001
Posts: 27661
Vette(s): Used to own a 1979 Corvette now owned by JB79
As soon as I fix one thing, something else brakes...
I went to unlock the passenger door yesterday, and the key goes in, then just turns both ways but nothing happens. I think the lock cylinder fell into the door cavity.
Could this have happened? Is it as simple as taking the door panel off to fix it?
|UPDATED|4/15/2003 8:33:46 PM|/UPDATED|
I went to unlock the passenger door yesterday, and the key goes in, then just turns both ways but nothing happens. I think the lock cylinder fell into the door cavity.
Could this have happened? Is it as simple as taking the door panel off to fix it?
|UPDATED|4/15/2003 8:33:46 PM|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
M
| Adam said: Is it as simple as taking the door panel off to fix it? |
I wouldn't call it simple, but it isn't too bad a job. The back side of your lock is attached by a rod to the latch mechanism. It sounds like that connection has been "compromised"!! You should be able to take off the door panel and see the issue. Do you have an Assembly Instruction Manual (AIM) for your '79? It has some good drawing of all the components in your door. If not then I would recommend taking of the other door panel as well (assuming that it is working OK!) and compare the two. You should be able to see what is missing/broken. I also highly recommend that you clean and grease all moving parts while in there. Definitely worth the extra effort!!
Mark
Recently transitioned to the "Dark-Side"
1996 LT4 Collector Edition Corvette
(miss my '72 though!!)
------------------------------------------
|B||I|Mark
The picture below is my
old '72 Big Block. She has
found a great home in
Jacksonville, NC!|/I||/B|
|IMG|http://www.c3vr.com/member_uploads/1_100/3/FrontView|/IMG|
|URL=http://www.corvetteforum.net/c3/qikstik|Click |B|Here|/B| To Visit My Home Page|/URL|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
g
Free Member
Send PMBRADENTON, FL - USA
Joined: 8/4/2002
Posts: 669
Vette(s): 1972 convertible 350 auto trans, delux int, air, ps, pb, t/t wheel, pw, 79,000 org miles Rare one year only color
hope you have small hands. its a tight fit back there. if the rod catch fell off you will need a magnet to get it from the bottonm of the door.
|UPDATED|4/16/2003 7:16:47 PM|/UPDATED|
|UPDATED|4/16/2003 7:16:47 PM|/UPDATED|
|IMG|http://www.c3vr.com/member_uploads/1301_1400/1333/br80.jpg |/IMG|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content