Sponsored Content
My Trim Tag is painted over by at least a couple of coats of paint. It's red paint so I can't even read the characters on the tag. Does anyone have any idea how to remove the paint from just the tag without damaging the tag itself or the surrounding paint?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Mask off around the tag carefully. Use a paint thinner, or better, paint stripper gel. A little at a time. Let it sit for a few minutes and wipe off. Remove the masking and remask. This should get the paint off of the tag, at least enough to read it.The reason to remove the masking after each wipe-off and then remask is to make sure the stripper doesn't soak into the tape, and get onto the body paint. Use the stripper sparingly....it might take a little longer, but it will be safer in the long run.
hth
hth
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content