Sponsored Content
Hi,
Only the left side of my tach is out and it flickers sometimes. This tells me the bulb is probably still good, but it is no longer seated properly. Is there anyway to get to this bulb, short of removing the entire dash? In other words, could I get to it if I just took off that plate under the steering wheel?
Larry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Not likely. In fact, it would be more likely you would knock something else loose!
You might try removing the upper dash pad instead of taking the cluster out. I've found that to be much easier, and you can get to most of the cluster bulbs from there. It's worth a shot.
You might try removing the upper dash pad instead of taking the cluster out. I've found that to be much easier, and you can get to most of the cluster bulbs from there. It's worth a shot.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content