New carpet, leather seats, and seatbelts for my 73
Forum: C3 Electrical, Body and Interior
Back in 1994 I replaced the vinyl seat covers with leather. I changed out the carpet with new.
I replaced the old seatbelts with 1999 Firebird (F-body rear) seatbelts.
that was a long time ago and lots of wear could be seen so time for new again.
This time I bought new seatbelts from seatbeltsplus.com
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Sign In to Like this post
The seat covers and carpet came from Corvette America, purchased from Willcox corvette parts
I had a local shop do the install of the seat covers, I didn’t trust myself.
|UPDATED|7/28/2022 9:08:22 AM (AZT)|/UPDATED|
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Sign In to Like this post
Then I finished it all off with new floor mats from Lloyd Mats
202272892457r.jpg)
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Sign In to Like this post
Back in 1994 I replaced the vinyl seat covers with leather. I changed out the carpet with new.
I replaced the old seatbelts with 1999 Firebird (F-body rear) seatbelts.
that was a long time ago and lots of wear could be seen so time for new again.
This time I bought new seatbelts from seatbeltsplus.com
Lookin' GREAT...!!! 👍
The seat covers and carpet came from Corvette America, purchased from Willcox corvette parts
I had a local shop do the install of the seat covers, I didn’t trust myself.
One winter I took on recovering the seats in "The Toy". More than anything it was a bit time consuming as I'd never done anything like that before. But it really wasn't that difficult a job.
But to quote a fellow known for a lot of memorable movie lines - "A man's got to know his limitations."
Then I finished it all off with new floor mats from Lloyd Mats
Lloyd's mats are great. Have purchased sets from them for "The Toy", "The Beast" and "BLKBRRD". Very happy with all of them.
|UPDATED|7/28/2022 3:47:49 PM (AZT)|/UPDATED|
Jim Olson 
"The Toys"...!!! Save the Wave! 
Sign In to Like this post
Moderator
Lookin GOOD, Brian!! 😃
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Sign In to Like this post
I too think that car looks outstanding.
And it looks like I did the same thing you did with my '73 L-48; have it appear like a calm stock Vette, but with the Heart of a Champion, only to be revealed with the turn of the ignition key. 😈
And like you, I had to have help from an upholstery shop in sewing up the seats. The Covers were too tight for me to close up. Not easy.
Happy motoring. 😉
Steve
Sign In to Like this post
Thanks
Driving is the only thing that matters but looking good makes it better
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Sign In to Like this post