Sponsored Content
Free Member
Send PMFrederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
I need to replace the weatherstripping on my '78. While the car is in great shape there are gaps in the rubber on the T-Top panels, etc. Having the tops drip may be more or less normal for these cars, I would like to stop it.
Does anyone know what supplier has the best weatherstrip kits? Who to avoid? For all I know maybe everyone buys them from one manufacturer or there is a real choice to make here regarding quality and reputation.
While I won't say the dollars don't matter, I think it's more important I make the right choice and only do this once, so I want to do it right.
Thanks to all in advance.
Does anyone know what supplier has the best weatherstrip kits? Who to avoid? For all I know maybe everyone buys them from one manufacturer or there is a real choice to make here regarding quality and reputation.
While I won't say the dollars don't matter, I think it's more important I make the right choice and only do this once, so I want to do it right.
Thanks to all in advance.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
g
I'd go to Wilcox. I haven't done my yet, but I've talked to them about it. They seem to know more (or at least care more) about you getting the correct ones for your car. And their prices are better on most other things I've bought from them.
Call (812) 288-7103.
Glenn
Call (812) 288-7103.
Glenn
Glenn's Bright Blue 75 T-Top
L48, 4 Speed, Dual Exhaust
L48, 4 Speed, Dual Exhaust
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Go thru Ebay to get to Wilcox, they do a BuyItNow for $203 I think.
EdelBrock Performer w/ 750 doub pumper,port/polished heads, triple cut valves w/4th cut down the throat of the exhaust valves, 286 Comp Magnum cam, 1.6 roller rockers, ball-peen pushrods w/guides, screw in rocker studs w/girdles, Comp double-roller chain, , hi-rise valves covers w/ spacer (needed for the girdles), Flowtech by Holley long-tube ceramic coated headers into Stage II pipes (no cats), chrome wire looms for the MSD 8.5 mm wires, MSD 50,000v coil kit w/advance springs, cap, rotor, module, steel-braided radiator,heater,vacuum hoses, Infinity Kappa 4x6 plates (dash), Sony Xplode 6 3/4" (rear), chrome T-stat housing, A-arm shields, B&M Hammerhead shifter
|IMG||/IMG|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I got great service and very good quality products from Corvette Rubber. Chances are pretty good no matter where you buy it they probably made it. http://www.corvette-rubber.com/
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
| Big Fish said: I got great service and very good quality products from Corvette Rubber. Chances are pretty good no matter where you buy it they probably made it. http://www.corvette-rubber.com/ |
I agree. I redid my CE totally with products from Corvette Rubber and everything matched up perfectly
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
j
Anybody who HAS done this have any advise?
I bought a kit off of ebay, but it came with no instructions or hardware, just the weatherstrips.
Will I need anything other than some time and patiece to install these?
I am doing the whole car BTW, not just the tops.
Thanks!
I bought a kit off of ebay, but it came with no instructions or hardware, just the weatherstrips.
Will I need anything other than some time and patiece to install these?
I am doing the whole car BTW, not just the tops.
Thanks!
John's '80 |IMG|http://driftriders.tripod.com//sitebuildercontent/sitebuilderpictures/80vette.gif |/IMG|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I just got in a set off of ebay ($203) from Wilcox. I'm just gonna have the paint shop install it (for a small fee) while the car is in for paint work.
Sarge
Sarge
GEN III 5.7L "LS6" Engine swap
TKO500 5 spd.
3.54 Dana 44
'69 "N11" Sidepipes
Borgeson Steering Box
Born 8/1981
Sequence #3975
Click here to see more pics of my Vette on CarDomain.
Lifetime Member #26
Borgeson Steering Box
Born 8/1981
Sequence #3975
Click here to see more pics of my Vette on CarDomain.
Lifetime Member #26
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I got T-Top weather stripping from Wilcox. It was $94 for both tops, everything was great. Here is the site.
http://www.yankeelady.com/willcox/
Took a lot of elbow grease
to remove old stuff, and I had to do some work on the top to remove rust & messed up hardware 
I found under the strips. Use a good adhesive/sealant and take your time. 
http://www.yankeelady.com/willcox/
Took a lot of elbow grease
to remove old stuff, and I had to do some work on the top to remove rust & messed up hardware I found under the strips. Use a good adhesive/sealant and take your time.
Lifetime Member #116
Dave's '82 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
d
3M makes a weathertrip adhesive remover that works really well. It won't hurt your paint. I even use it to remove the weatherstrip from cars I'm getting ready to strip.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
a
got mine from wilcox.. very nice priced.. and they gave good service when they made a small mistake by sending the wrong set interiour screws with the package i ordered by sending the right set imidiately
about quality difference between different suppliers i can't give any advice since i don't have any idea
about quality difference between different suppliers i can't give any advice since i don't have any idea
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content