Sponsored Content
Sign Up To Join Us Now!
Free Member
Send PM, France
Joined: 6/9/2013
Posts: 12
Vette(s): Corvette! A child's dream come true since last year!
Hi, new member (from France) on this forum and already the first problem on my 81 corvette at you submit!! With no manual I need help to put the right parts in the right place! The previous owner of the car gave me a surprise, in fact, the console was completely removed! So your help will be invaluable! here is a picture of the console, I have the nuts and fuses but I do not know which way I have to put on the gauges! What colors match? Should we put a washer under the nuts? If someone has a solution, thank you in advance!! And sorry for my english 
Gauge Cluster pic
(large image modified to link-aapple)
|UPDATED|6/9/2013 7:24:54 PM (AZT)|/UPDATED|
Gauge Cluster pic
(large image modified to link-aapple)
|UPDATED|6/9/2013 7:24:54 PM (AZT)|/UPDATED|
Corvette, My Life, My Way...
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22742
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Those are not fuses. They are resistors, or shunts. I can't help with which one goes where, since no two gauges would read the same. Hopefully, someone here with an '81, that has had the cluster off will have the info on where theirs were.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMLemon Grove, CA - USA
Joined: 10/17/2007
Posts: 2042
Vette(s): 1982 C3 Collectors Edition 44000 miles, sat in the sun most of its life, My wife purchased it for me for Father's Day in 2007 from her girlfriend that had it for 19 years. It is on the road again. I'm retired but it is now my daily driver.
Jean
|UPDATED|6/9/2013 9:42:11 PM (AZT)|/UPDATED|
Well You have come to the correct forum. I will have to upload some pictures from when I did it. I took mine apart left everything where I though I could remember and then tried to put it back together after a month.
Did not work out well. I borrowed one from a parts house and then took pictures these I will send you. If you cannot see where the spacers are then let me know and I will see if I can borrow another one and take better pictures of where things go. I have some in dash work I may have to to this weekend and if I do I will Make sure that I take really good pictures of all of the spacers. Anyway you look at it I can help you with your issue.
By the way the colored shunts should work if you put them where they are shown on my car. It will just make the gauges read a little off. There is know way to know which goes where for sure at this point. My car is an 82 so it has a oil temperature gauge you have a clock. No big deal.
What part of France are you from. I just got back for a week in Paris and the wife wants to go back and see more. She is pushing for 2 weeks this time.
Jean I'm just going to email you the pictures there are a number of them. If anyone needs them just add a tag and I will email them to you also.
|UPDATED|6/9/2013 9:42:11 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Free Member
Send PM, France
Joined: 6/9/2013
Posts: 12
Vette(s): Corvette! A child's dream come true since last year!
Hi Gilbert, thank you very much, I have received your email! I see on picture, two blue resistors, one green and one brown! I don't have a brown but a pink. Do you think I can put the pink on the location of the brown?
I tried to put everything properly and give it a try! I would tell you if it works or not! I would take a picture when finished! I hope not to have other surprises for the rest, I also watch the tachometer!
Se you later and a very big "thank you" for your support
For information, i'm near Paris, in "Seine Et Marne" in a in a small village surrounded by greenery and horses, very quietly! except when I start my corvette of course
|UPDATED|6/10/2013 12:41:34 PM (AZT)|/UPDATED|
I tried to put everything properly and give it a try! I would tell you if it works or not! I would take a picture when finished! I hope not to have other surprises for the rest, I also watch the tachometer!
Se you later and a very big "thank you" for your support
For information, i'm near Paris, in "Seine Et Marne" in a in a small village surrounded by greenery and horses, very quietly! except when I start my corvette of course
|UPDATED|6/10/2013 12:41:34 PM (AZT)|/UPDATED|
Corvette, My Life, My Way...
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Free Member
Send PM, France
Joined: 6/9/2013
Posts: 12
Vette(s): Corvette! A child's dream come true since last year!
problem solved... Thank's Gil!
Corvette, My Life, My Way...
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
-of-joe120111130185311r.jpg)
Free Member
Send PMmacedon, NY - USA
Joined: 7/20/2006
Posts: 367
Vette(s): 68 COUPE 454
HAS MOTION HOOD SCOOP, REVERSED GILLS
ZL-1 FENDER FLARES AND
MOTION REAR SPOILER, LEMAN'S GAS CAP,
BUCKET HEADLIGHTS.
CAN-AM FRONT
RACING SPOILER. CHROME HOOKER HEADERS AND SIDE PIPES! 4 SPEED M20,
LOOKS FAST STANDING STILL !!
Welcome to the site !
These guys here helped me a great deal when I was putting together my 68. I could not have done it without them!!
Joe
These guys here helped me a great deal when I was putting together my 68. I could not have done it without them!!
Joe
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content