Sponsored Content
b
I am planning to convert the standard points ignition on my '70 L-46 convertible to a MSD electronic system. For those of you that have gone this route, where have you mounted the 6AL box to retain some appearence of originality, as well a practical location?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
J
Have an MSD on my 69. I mounted it on the inside of the left front fender well, below the vacune tank. It is out of site but you are able to change the rev limiter chip through the fender slats.
john
|UPDATED|1/10/2004 2:48:11 PM (AZT)|/UPDATED|
john
|UPDATED|1/10/2004 2:48:11 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
b
Former Member
Send PMWelch, MN - USA
Joined: 7/18/2003
Posts: 201
Vette(s): 1974 Black 454 Stingray coupe, turbo 400 tranny, barry grant 750 carb, hooker super competition headers, moves along!
i also did the same, i removed my windshield washer fluid which had no purpose really, and it mounted right up using the bracket off of the tank. It is not visible unless you really look.
|IMG|http://www.imagestation.com/picture/sraid142/p29edeeda980a8aa16c5a61f6cbacf25e/f6a6be42.jpg|/IMG|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
b
Thanks for the input. I'll go a similar route.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content
