Sponsored Content
I had my sidepipes and valve seals done ....and now my oil and water gauges don't work.The guy said he didn't mess with them.....they worked when I took the car in .Dose anyone have a drawing or can you tell me where they plug in at on the motor so I can check to see if they are still connected.
Rick
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
The oil pressure sending unit is right above the oil filter.
The temp sending unit is between the front two spark plugs on the driver side.
He may not have messed with them, but the wires could have gotten too close to the exhaust, and melted....but it's more likely they got unplugged for the install.
The temp sending unit is between the front two spark plugs on the driver side.
He may not have messed with them, but the wires could have gotten too close to the exhaust, and melted....but it's more likely they got unplugged for the install.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks Joel I check them tomorrow when I get off.
Rick
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content