Home page

interior courtesy lights engine comp light

Forum: C3 Electrical, Body and Interior

4 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

interior courtesy lights engine comp light

Posted: 11/27/08 9:25amMessage 1 of 4
B
Standard Member
Send PM
Joined: 12/3/2007
Posts: 292
Vette(s): 1978 Corvette Light Blue Pulled from the swamps of Miami! Its a driver and back on the road!
ok got the speedo working fine and now the next item...opening the drivers door you have the switch in the door attach area and it works fine for the warning for the keys in ignition with the door open, but no connection to turning on the dome light or floor lights. Am I correct it should turn on the dome light and fllor lights or is this maybe an option I do not have on my car.  also second question... the engine compartment light should it turn on when the hood is openied and the lights on or will it come on with the light switch in the off position...right now it does not come on at all??? I have power to the itiial wire at the harness left side of hood but from there to the bulb  I am not getting a light on but when should this light be on.  I see a simular switch on the right rear side of the hood and thought this is the release to turn on the hood light but now read something it might be an ati theft switch??? have very little info on what options were on the car as cannot track any history of the car or previous owners 1978 that someone or many let go to pot.... tany info will be appreciated...

Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

interior courtesy lights engine comp light

Posted: 11/27/08 9:46amMessage 2 of 4
Profile Pic
Lifetime Member
Send PM
Greensburg, IN - USA
Joined: 9/24/2003
Posts: 5387
Vette(s): Previous: 1984 Coupe, 1988 Maroon Coupe, 1989 Coupe, 2001 Roadster Present: 1967 Stingray Roadster, 1976 Stingray Coupe, 1989 Roadster..
Whew.... wires wires everywhere and not a place to connect.... wires wires everywhere.... and Bubba was here I suspect....

Sorry for that. I see you have 2 other posts concerning wiring issues as well as this one. I am only going to comment on part of this one.

The wire and the switch on the passenger side cowl is for your security system.

This LINK will put you in touch with my buddy Joel (ADAMSAPPLE) and you can send him a PM requesting a wiring diagram to which he will supply you with a CD for one. This should help you weed through the mess that Bubba has left for you.

For sure others will reply to your threads and help as well. Another help would be if you can post a picture of the wires too. As they say a picture is worth a thousand words.

Hope this helps some!

                                                  Tux... Tuxblacray2008-11-27 09:47:38
Be the first to like this post
Sign In to Like this post

interior courtesy lights engine comp light

Posted: 11/27/08 10:07amMessage 3 of 4
B
Standard Member
Send PM
Joined: 12/3/2007
Posts: 292
Vette(s): 1978 Corvette Light Blue Pulled from the swamps of Miami! Its a driver and back on the road!
Thanks I know I need to get pics of the wires under dash and a wiring diagram but thought if I identified the ends connections color although they might not be original if would help. Thanks for your quick reply and will do after today. have a great Thanksgiving  78 Babyblue

Be the first to like this post
Sign In to Like this post

interior courtesy lights engine comp light

Posted: 11/27/08 8:02pmMessage 4 of 4
a
Former Member
Send PM
Orillia, Canada
Joined: 6/23/2008
Posts: 558
Vette(s): 1972, 1980
Your hood light, is a mercury switch in the lower part of the light housing, it comes on when you lift the hood, it prob has a bad contact in it...more than likely you will have to replace the light holder. Unless you want to pull it a part and get rid of the green breaking the contact.
The interior door light switch has two contacts in it at the back, one for the buzzer/security and one for the interior light, the little wire that goes to it has prob lost contact at the back of the switch, unthread it form the A piller and check your wires there.
John
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Electrical, Body and Interior


Sponsored Content