Ignition

I would like to replace my original Distributor with new one. Should I go HEI, and if so who makes one with tach drive for 71 350/270?

Mid America sells a conversion distributor that is an HEI with the mechanical tach. The number is 604-059 and sells for $539.99. You can also use your distributor and put an electronic conversion inside. One is made by pertronix and sells for $89.99 from Mid America. The web site is www.madirect.com
Hope this helps

This months Corvette Fever says you can put Igniter control box & 40,000 volt coil with point system.What do you guys think?

MSD makes a "Corvette" electronic distributor complete with mechanical cable drive for your tach

Hi jedvline. Would you happen to know the number of the MSD Dist.I know I can go with HEI dist. but the mag. says you can raise you voltage to 40,000 but putting the msd ignition box in and keeping your point system. Whatcha think Thanks

|UPDATED|5/14/2003 9:07:10 AM|/UPDATED|

I was running a 50.000 V ACCEL coil with normal points without problems for years.
Last winter, when I rebuild the distributor, I installed the PERTRONIX 1 system that eliminates the point. I'm still running the same coil and all is fine so far.
Gunther

Hey, Floyd

MSD Corvette Pro-Billet Tach Drive Dist is their PN 8572. I'm running one with an MSD 6 Box and Blaster 2 coil. Plenty of jolt, all the way to redline on my modified 350.

I'm not a big fan of blade switches, whether called "points" in our cars or "switch stacks" in the electromechanical gaming and amusement devices I've worked on for 25 years.

So is that MSD an HEI distributor P/N MSD 8572. It is showing in summit for under $300.

If you mean "Does it carry its coil on its back?" the answer is "no." It does not have an integral coil.