Home page

Hot wire for electric choke

Forum: C3 Electrical, Body and Interior

4 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

Hot wire for electric choke

Posted: 7/10/13 10:43amMessage 1 of 4
Profile Pic
Lifetime Member
Send PM
Ash Fork, AZ - USA
Joined: 4/18/2007
Posts: 1058
Vette(s): 1981 Red Interior White exterior
In case you haven't noticed, my ability to find an electrical problem is outstanding...my ability to fix said problem, let's just say "some people not have way I guess"(thank you Steve Martin).  I need to look for an ignition controlled hot wire for the electronic choke for my edelbrock carb model 1406.  I absolutely stink at tracing wires and following wiring diagrams.  Yes, I know my limitations, I just need to find them all and start listing them!

Thanks,
Dave C..........My mantra: I can not be bought!!      Long and short term leases available.
In the words of Zora Arkus-Duntov "Is your seat belt fastened? Alright, Let's go"


Yeah, I know, Shut up Dave.
Lifetime Member #192


Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

Re: Hot wire for electric choke

Posted: 7/10/13 12:17pmMessage 2 of 4
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Check your fuse-box for a terminal marked "IGN"...run a wire from that out to the choke housing. Of course, this is gunna have you crawling up under the dash....not much fun with a screwy back....Ouch
However...the wiring diagram shows that the '81 had an electric choke to start with...so....I would find the brown wire coming from the alternator, and tie into that. You should also see a fuse marked "Choke Htr" in the fuse box. THis is where the brown wire gets it's ignition fed power.
There should be a "Choke Heater Relay" in that circuit...somewhere....still looking for that location....

|UPDATED|7/10/2013 12:17:39 PM (AZT)|/UPDATED|

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

Re: Hot wire for electric choke

Posted: 7/10/13 12:45pmMessage 3 of 4
Profile Pic
Free Member
Send PM
Vancouver, WA - USA
Joined: 8/25/2005
Posts: 869
Vette(s): 1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
If for whatever reason Joel's advice doesn't work out (seems like it should, though) you could use the wiper motor hot lead, which becomes hot when you turn on the key.  That's what I did on mine - 76 used a hot air choke, but my Edelbrock Q-jet has electronic. 

 

1976 Silver/Firethorn.  L48, 4spd.  Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Be the first to like this post
Sign In to Like this post

Re: Hot wire for electric choke

Posted: 7/10/13 5:41pmMessage 4 of 4
Profile Pic
Free Member
Send PM
Woodland, WA - USA
Joined: 10/14/2003
Posts: 1171
Vette(s): 1977 T-Top,350,Auto Black Ruby Pearl,Steeroids R&P conversion
on a 1980 the choke heater relay is under the center counsel


|UPDATED|7/10/2013 5:41:25 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Electrical, Body and Interior


Sponsored Content