Help in locating neutral start switch
Forum: C3 Electrical, Body and Interior
6 Messages
Page 1 of 1
Sponsored Content
Does anybody know where the neutral start switch is on a 79 vette. Not the one in the console. but the one under the dash.... Heavy guage purple and yellow wire connection. I dont tknow if it is a seperate switch, or plugs in around the steering column somewhere...
Thanks
Dan
|UPDATED|11/16/2003 9:27:48 AM (AZT)|/UPDATED|
Thanks
Dan
|UPDATED|11/16/2003 9:27:48 AM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
For an automatic, it will be part of the shifter assembly in the center console (along with the reverse light switch).
For a manual trans, it's connected by a linkage to the clutch pedal, tucked up where it's almost impossible to get to without removing the pedal carrier assembly..... look up by the top of the clutch pedal pivot.
You might want to look at one of the diagrams on-line at the Corvette Central or such sites, they usually have pretty good exploded diagrams....
Hope that helps,
Pancho
For a manual trans, it's connected by a linkage to the clutch pedal, tucked up where it's almost impossible to get to without removing the pedal carrier assembly..... look up by the top of the clutch pedal pivot.
You might want to look at one of the diagrams on-line at the Corvette Central or such sites, they usually have pretty good exploded diagrams....
Hope that helps,
Pancho
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
So, If my car is an automatic, that end by the column doesn't actually get plugged into anything at all???? 

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Free Member
Send PMFrederick, MD - USA
Joined: 9/8/2003
Posts: 3398
Vette(s): 1969 convertible L71 427/435 4-speed black interior
According to the wiring guide for my '78, that purple wire goes to the starter solenoid from the neutral safety switch, and the yellow wire goes from the hot (start only) side of the ignition switch to the solenoid.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I'm still a bit confused....does the column end plug into anything on an automatic or not?????
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Not for the neutral safety switch,no.
You do have wiring for turn signals,ignition etc.
You do have wiring for turn signals,ignition etc.
On the "Tail of the Dragon"
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content



