Sponsored Content
B
I have just completed transferring guages to new bezel.
Fixed clock, new bulbs, lense, etc. When the guages were out, I may have moved the needles. Will these go back to correct readings when plugged in ? Should I have left them alone, not touched them ? I can see voltage probably correcting itself, but gas, oil pressure, temp?
1979 L-82. Any advice appreciated. I sure don't want to take apart again. Thanks for any advice.

Fixed clock, new bulbs, lense, etc. When the guages were out, I may have moved the needles. Will these go back to correct readings when plugged in ? Should I have left them alone, not touched them ? I can see voltage probably correcting itself, but gas, oil pressure, temp?
1979 L-82. Any advice appreciated. I sure don't want to take apart again. Thanks for any advice.


Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Unless you removed and then re-installed the needles you should be okay. If the needles were removed, I'm not sure what the fix is, but I could find out if needed.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
B
Big Fish - Thanks for info. I did not remove the needles off the shafts. Never thought of that. So all guages should go back to normal.
Appreciate the info.

Appreciate the info.



Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content