Sponsored Content
R
Hi, I installed a Custom AutoSound radio in my 75. I can't seem to find where I can hook-up the ground from the radio. Does anyone have any ideas? Thanks!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
You should be able to run the ground wire from the radio to the metal "U" shaped brace that runs under the radio at the front. This brace also helps hold the center console in that area.
You could also run a wire all the way back to the battery if you wanted to...but that's a pain.
hth
Look here for braceAdams' Apple 2008-03-04 20:35:30
You could also run a wire all the way back to the battery if you wanted to...but that's a pain.
hth
Look here for brace
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks for reminding that I don't want to mess with my radio.
Save the Wave!
Support the National Corvette Museum
Support the National Corvette Museum
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
R
Excellent! Thanks. I will give this a shot.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
6
The black on the original radio connector on the harness is a system ground. Yellow is power and the gray is illumination.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
The PO put in an aftermarket radio and didn't hook up a ground. The bracket behind the radio did not ground back to the battery. My gages did not work correctly until I ran a new wire that I connected to the black wire in the old plug and connected it to the gage cluster and the new radio. Redwingvette 2008-03-11 13:41:27
Brian - NCM Lifetime Member
73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System
Dewitt radiator and dual electric fans
Borgeson Steering box
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content