Sponsored Content
G
so the lock just spins, and i cant get it to open. whats the best way to get it open with out effin it up? thanks in advance..
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Former Member
Send PMManteca, CA - USA
Joined: 11/20/2005
Posts: 3623
Vette(s): 1978,two tone,Metalic Rootbeer & gold
1975 L48 4 speed
Curious. Since the internal cylinder can't spin free inside the housing, you have to wonder what's holding the door closed. With the help from my brothers here at the forum, I've only just discovered how to remove the cylinder from the housing but can't really imagine what's going on there without messing with it 
. I'm sure our members will have some thoughts on the matter but till then, I'll fiddle with one and see what I might find and report back.
. I'm sure our members will have some thoughts on the matter but till then, I'll fiddle with one and see what I might find and report back.Jimmy B.
Just can't wait to get on the road again. 
Click to see larger views!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
j
OK, i think whats happening is .... the whole in the door where the lock goes has a notch so when the lock is held in place with the nut that threads to the lock is torqued down, it will hold the cylinder in place. what i think happened is the nut is so loss that the tab on the cylinder os out of the notch. you might have to remove the cylinder off the and tighten everything up. does it spin when the glove box door is open or closed?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Get KATO to open it.
Just couldn't pass that one up.
Dave
Lifetime Member #116
Dave's '82 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
G
the door is closed... cant get it open. im going to try and see it i can get in there with a small hook to open it.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Free Member
Send PMOak Creek, WI - USA
Joined: 5/21/2008
Posts: 2041
Vette(s): 1981 Great White Shark. Red Interior, 350/190 hp. PS, PB (SS), A/C CC, T-Tops. Served three years in Active Duty Army, then Retired Air Force after 34 years! Badger State Vettes Car Club. 175,000 Original miles!! Now own a 1998 C-5!
Insert the key into the lock. Hold the cylinder with a small screwdriver, door should open. As a last resort you can use a BFH !!!! lol
Dan
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
g
Lifetime Member
Send PMIrving, TX - USA
Joined: 8/21/2004
Posts: 4286
Vette(s): #1 -1969 Corvette Coupe Riverside Gold, black interior,MN,A/C,350/350,PS,PB,window cranks.
#2 -2000 C5, black/black, 6 sp, Bose system & lots of buttons.
What glovebox???!!! All I have is 3 cubby holes behind the front seats - if those are gloveboxes, it's a JOKE..........
�����
My Link 
MICK - C3VR Lifetime Member #113
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content