Sponsored Content
J
Free Member
Send PMMAPLE, Canada
Joined: 3/9/2008
Posts: 164
Vette(s): 70 VETTE 350/300HP, AUTOMATIC, ALL STOCK EXCEPT FOR MILD CAM,LAGUNA GREY, 3:55 POSI GEARS
Has anyone replaced this before, what are the steps or has anyone have pictures,
just noticed mine does not kick back up.
just noticed mine does not kick back up.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Someone else will correct me if I am wrong but the return spring I believe is on the carb
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
J
Free Member
Send PMMAPLE, Canada
Joined: 3/9/2008
Posts: 164
Vette(s): 70 VETTE 350/300HP, AUTOMATIC, ALL STOCK EXCEPT FOR MILD CAM,LAGUNA GREY, 3:55 POSI GEARS
I believe there is a spring in behind the pedal. This keeps the accelerator pedal upright.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
j
It's been a while since I replaced mine (ok, installed it since it was missing). It's on the engine bay side. If I remember, getting the spring into the hole on the pedal shaft was a pain - or maybe it was the end on the firewall. Not too hard, just need a little patience. I'd post the picture from the AIM book but all my stuff is packed up in storage right now.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
J
Free Member
Send PMMAPLE, Canada
Joined: 3/9/2008
Posts: 164
Vette(s): 70 VETTE 350/300HP, AUTOMATIC, ALL STOCK EXCEPT FOR MILD CAM,LAGUNA GREY, 3:55 POSI GEARS
Your right John, it did take a little patience. Purchased a new spring, it was a little tricky to hold the pedal and the spring and at the same time slide the pin in back of the pedal to hold it all together.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content