Sponsored Content
Dose anyone have any diagrams or info on removing the dash. I cann't find anything in the assembly manual,and the hanies book is no help.I want to replace the speakers.Or dose anyone knows of any posts on this subject. lately.
Thanks Rick
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
j
This link will give you most of what you need to know.
You will have to remove one or maybe both of the window pillar mouldings to get the dash out. To get it out, you will have to bend it a bit, so do it on a warm day. You may be able to replace the speakers just by lossening everything up and putting a block of wood between dash and other trim panels so you can get your hands in around speakers.
I've been doing this to connect up my speaker wiring. Good Luck
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
j
Here is an even better set of instructions; I was looking also as I'm going to go in there to connect my speaker wires today.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
If you follow the willcoxcorvette instructions you will have no problems replacing speakers. your dash pad comes out pretty easy once you've removed the pillars. Now the left side dash panel is a different story.....................
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content