Sponsored Content
R
Here is a strange one. I decided to take the shifter console off to give it a new coat of black paint. I noticed the bulb for the heater switch and the bulb for the shifter console needed to be replaced. I'm having issues with the bulb for the shifter console. I tried a couple new #1895 bulbs and could not get to work. When I take the bulb out and put a test light to the socket I get juice. Does anyone have any ideas? Maybe not enough juice?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
V
Former Member
Send PMMounds View, MN - USA
Joined: 5/24/2007
Posts: 1034
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
Electrical problems on Corvettes are almost always a ground problem. First see if a test light works if you go from the bulb socket center electrode to a known good ground. If not, you have an open circuit before the socket. If yes, you have a ground problem. Just work backwards from there until you find it.
Larry
Larry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
s
[QUOTE=VetteSpecialties]Electrical problems on Corvettes are almost always a ground problem. First see if a test light works if you go from the bulb socket center electrode to a known good ground. If not, you have an open circuit before the socket. If yes, you have a ground problem. Just work backwards from there until you find it.
Larry
[/QUOTE]
Larry
[/QUOTE]
Totally agree 
sgm2004
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content