I'm doing a frame off restoration on a 1972 convertible and I had to cut the back right (passenger side) body mount bolt off. It's down under the convertible top bracket and is a real pain to get to. I thought about taking out the convertible top bracket and spring and that is goingn to be a pain. Any tips on getting the old bolt out before I replace the body?

Thanks, corvettedave....

Be the first to like this post
Sign In to Like this post

SPONSOR AD:: (Our Sponsors help support Vette Registry)

Body Mount Bolt Problem

Posted: 10/27/08 10:57amMessage 2 of 3

Reply Quote

VetteSpecialties

Former Member

Send PM

Mounds View, MN - USA

Joined: 5/24/2007

Posts: 1034

Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe

Since you have the body off, do it from below. As a last resort, drill out the rivets that hold the plate (it is called a deck lid hinge reinforcement) and work on the bench. New plates are available if necessary.

Larry

Be the first to like this post
Sign In to Like this post