Sponsored Content
A
Well in some ways it's nice to know others have or had the same problem. Thanks for all the input and I guess the meter comes out and the investigation begins. I'm starting to think it has something to do with the pennys that were taped over the door switches when I got her - of course I removed them.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
T
Former Member
Send PMFAIR HAVEN, NJ - USA
Joined: 9/17/2004
Posts: 120
Vette(s): #'s matching hugger orange '77. flowmasters rebuilt eng & trans
Hi, I know you have read alot of these but just let me add one more. I just (three days ago) had this one solved on my '77: the wiper motor was beat but since the wipers were slightly engaged (up alittle) they were using power and would drain batt. over night. New wiper motor no more problem.
Thing is since we dont drive our prize possesions in the rain that goes unchecked.
Good luck!
Thing is since we dont drive our prize possesions in the rain that goes unchecked.
Good luck!
|COLOR=ORANGE| |/COLOR|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMHot Springs, AR - USA
Joined: 4/24/2004
Posts: 3236
Vette(s): 69 Conv #'s match 427, TKO-600/.64, 3.36HD-Posi, HT, T/T, PS, PB, PW, SP, Leather, Comp XE264HR & Roller Rockers & Lifters, Air-Gap RPM intake, Holley St Av 770 VS, MSD 6AL+Dist+Blaster SS, K&N, Jet-Hot Hooker Side-Pipes, Steeroids, Al Rad, Spal Fans
| Bob Griffiths said: Why do I seem to always agree with CTHULHU.... |
because great minds think alike !!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
cthulhu said:
because great minds think alike !! |
Now THERE'S a SCARY thought...!!!
Jim Olson 
"The Toys"...!!! Save the Wave! 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
l
Free Member
Send PMNewark, CA - USA
Joined: 4/29/2004
Posts: 350
Vette(s): 1969 Corvette 4-speed ZZ-4 crate
Monza Red
Look out.......... getting deep in here
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
c
Former Member
Send PMLake Oswego, OR - USA
Joined: 12/29/2002
Posts: 355
Vette(s): 1968 Corvette T-Top Coupe, 427 L71, Rally Red Exterior, Saddle Interior
I have a drain also. My amp gauge is not working and someone once told me that this could be the source of the drain. Anyone ever heard of this before? I've been using the cut off switch for now.
Mark
Mark
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I believe everyone has had this problem at one time or another. My problem was come and go sometimes it would drain overnight and then maybe a week later. Found the problem on a sleepless night, went to the garage a noticed a very thin line of light around the glove box. Yes thats right the glove box button was not deactivating every time and vibrations from driving made it erratic.
Annicorvette
Lifetime member # 35 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Bob I know how you feel. I often have an answer that someone already answered. But that's fine.
Corvette427, the amp gauge won't cause a current drain unless it is shorted to ground. It has no ground path, just a straight through path. If it is grounding it would most likely create a direct short and cause it to blow a fusiable link.
It is possible that's your problem, but unlikely.
Corvette427, the amp gauge won't cause a current drain unless it is shorted to ground. It has no ground path, just a straight through path. If it is grounding it would most likely create a direct short and cause it to blow a fusiable link.
It is possible that's your problem, but unlikely.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMHOWELL, NJ - USA
Joined: 5/18/2004
Posts: 6812
Vette(s): 1979, Targa Blue (72 Color), Pace Car rear spoiler, L88 hood, Dark blue factory interior, 525HP 406, HD 700R4, 370 gears,Steeroids, composite rear spring, TT IIs wrapped in T/A Radials.
Once again this great community comes through. I found a loosely connected ground wire that was hanging on a stud inside the drivers side fender on the firewall for a missing alarm horn. I'm no electrical expert, but tracing all of the alarm wires as suggested in this thread yielded the answer to my problem. No more battery drain
Thanks TUMAR!!
God Bless America
Support Our Troops
LukesVette Homepage
Veteran of Operation Iraqi Freedom
101st Airborne(AirAssault!)
God Bless America
Support Our Troops 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
J
as I sit here reading these posts and appreciate the knowledge that is generated from everyones imput and experience, I can only think back about a week ago or so when someone from the corvette forum was confused about why we would pay to belong to the c3vr.PRICELESS. Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content