I’m about to embark on a small project to replace the A pillar seals on my ‘79. I’m wondering if any forum members have done this and if there’s any advice or lessons learned?
Thanks in advance.
|UPDATED|7/22/2025 10:52:08 AM (AZT)|/UPDATED|
Sign In to Like this post
I would recommend getting a copy of the Factory Assembly Manual from one of the aftermarket Corvette suppliers.
1973 L-82 4 spd
Sign In to Like this post
Moderator
The rubber seals fit into retainers that are screwed to the pillar. Depending on how crusty the retainers are, or how bad the rubber is, you may need to remove the retainers, clean them really well, then install the rubber. The retainers will have a sealant between them and the A pillar, also. Use the black 3M Weatherstrip Adhesive to secure the rubber to the retainers, and follow the directions on the adhesive EXACTLY. Dry fit everything before gluing the rubber to the retainer.
If the retainers are in decent shape, you can clean them well, making sure there is no old adhesive on them, and then glue the rubber to the retainer. Dry fit first, as well.
|UPDATED|7/22/2025 9:54:05 PM (AZT)|/UPDATED|
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Sign In to Like this post
Thank you!
Sign In to Like this post