Sponsored Content
Before I park my ars under the car and remove the wrong stuff can someone tell me what 4 manuals can't...how many bolts hold an entire headlight assembly.I want to remove them as complete asemblies.Vacuum lines and electric have been removed. Thanks again,Mikeee
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
d
my '73 has 5. Two in the front and three in the back.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
P
Lifetime Member
Send PMApache Junction, AZ - USA
Joined: 10/15/2006
Posts: 285
Vette(s): 1982,150K,Renegade CFI,Hooker Side Pipes,85 fuel pump,Bilsteins,HD suspension, Aluminum radiator, SharkBar/w 5-Point Restraints. 3:73 gears coming soon.
Same on my 82.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks again for the good info.Five bolts on each headlight ass. I dropped it down and pulled it out on motor side.When I put them back I will be sure no wires are in the way,that was the only small problem. Is there a procedure to check the actuators? Don't want to put back bad ones.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
d
I use a hand held vacume pump to test mine or just suck on the fittings. that will tell you if the diaphrams are good. If the rod seals look worn, I would replace them while you have the actuator out. Thats generally a problem area.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content