Sponsored Content
A
The '76 Corvette shared the same steering wheel as the Vega for that year only. I e-mailed Grant at one time and they do not make anything for the 1976 Corvette.
Aaron 
CLICK HERE to enlarge picture
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Soooo, now the next question,,, where can I get a 74,75, or 77 steering column? Any ideas??
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Oh and how much should I pay for it? What would be a good deal?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
w
Lifetime Member
Send PMMundelein, IL - USA
Joined: 6/9/2008
Posts: 411
Vette(s): 1978 25 anniversary blue on blue with T-tops.
I would say check out ebay and such. I paid like 150 for a used one like this, had it rebuild for 270 including shipping. It looked great after rebuild. If you are michanically inclined you may be able to rebuild it yourself, But that was someting I just did not want to get involved with.
Lifetime Member #150
Recent Modifications 
"Drive it like you stole it"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
A
There is an old post I posted back in July that has some info from suncountry that might help you out. The post is "1976 Steering Wheels?" Check it out!
Aaron
CLICK HERE to enlarge picture
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks Aaron,
Good info. I also found in that post, where you can just replace parts and get the same. I think I will check into gettings the parts. May be a easy deal. That is if I can find all the parts! LOL
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
What year model columns will fit in a 76? I found a 78 but not sure if it will fit.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Former Member
Send PMMounds View, MN - USA
Joined: 5/24/2007
Posts: 1034
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
I checked with our steering column expert. All 69 to 82 will bolt in.... BUT.. 77 had a wiper switch in it so should be avoided. Only 76 and newer had a dimmer switch in the column. Earlier ones had it on the floor. So a 78 to 82 is your easiest option. They are available for about $150.00 or so, plus about $300 to rebuild, if needed.
Good Luck
Larry
Good Luck
Larry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks Larry!
That is some great info. I am still learning about the vetts and maybe one day I will be in the place I can help out some fellow members.
Thanks again!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content