Sponsored Content
Hey all !
Just noticed that on my 75 Coup, the license plate light bulb socket it just hanging from the wires out the T shaped cutout in the rear panel. I need to find the correct bracket or whatever is supposed to be holding the license plate light bulb fixture to the body. I checked with my fingers through the T shaped cut out and don't feel anything. Just hollow space.
Can anybody point me in the right direction?
Thanks in advance for any help.
Trent.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22714
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
The lamp should be fitted to the back side of the bumper cover, and held in with two screws from the outside. Assy manual doesn't show a "t-shaped hole" as you describe, but a search does show the rear cover for a '75 to have that type of hole. What does your light fixture look like? This?
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks for the reply.
|UPDATED|4/7/2017 10:47:31 AM (AZT)|/UPDATED|
I don't have the fixture. Just the bulb,socket and wires. The light works.
The picture you have there does look like what I need.
There aren't any holes around the opening where the fixture should mount though.
Do you know if the fasteners pivot above the opening to mount the fixture ?
Where would you think I could buy that fixture?
Thanks.
Trent.
|UPDATED|4/7/2017 10:47:31 AM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
F4Gary said: Should be a good diagram in the AIM.
What and where is the AIM ?Thanks.Trent.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Trent said:
What and where is the AIM ?Thanks.Trent.
F4Gary said: Should be a good diagram in the AIM.
What and where is the AIM ?Thanks.Trent.
https://www.paragoncorvette.com/p-351205-corvette-assembly-manual.aspx
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
F4Gary said:
https://www.paragoncorvette.com/p-351205-corvette-assembly-manual.aspx
Thanks Gary.Trent.Trent said:
What and where is the AIM ?Thanks.Trent.
F4Gary said: Should be a good diagram in the AIM.
What and where is the AIM ?Thanks.Trent.
https://www.paragoncorvette.com/p-351205-corvette-assembly-manual.aspx
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content