Sponsored Content
r
I think these vent cables may be on 1968 
thru 1974, non air. One cable attaches to the left vent and one to the right floor vent. The other half (wire part only)will attach to the open/close vent on the console. Now where do you attach the plastic part with a hole in it for a screw.. It has to be attached somewhere to make the cable work, and stay in place. Does it attach to the underside of the console somewhere or WHAT. The assembly book on the 68 does not show where the plastic part attaches.
thru 1974, non air. One cable attaches to the left vent and one to the right floor vent. The other half (wire part only)will attach to the open/close vent on the console. Now where do you attach the plastic part with a hole in it for a screw.. It has to be attached somewhere to make the cable work, and stay in place. Does it attach to the underside of the console somewhere or WHAT. The assembly book on the 68 does not show where the plastic part attaches.Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Not really sure myself...seems like there would be a place on the bottom side of the console to screw that thing into...
I'll check my AIM when I get home, unless someone else can before then.
I'll check my AIM when I get home, unless someone else can before then.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Does this help look at the tech diagram on the right of the page
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
r
Can't really tell. Maybe it connects to the heater control housing. But where the cable plastic part that has a hole in it does not come back as far as the heater control.
At least on on the right side.
I could somehow attach the plastic part to the left side of the heater control assembly, but the right side won't fit on this housing.
I think I had it rigged somehow before, but I have had it apart for a long time while getting it painted. Just want to put it back correctly.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content