Sponsored Content
Former Member
Send PMEvansville`, IN - USA
Joined: 6/25/2007
Posts: 46
Vette(s): 1972 Convertible, ontario orange, ps/pb/pw/air conditioning and 31,000 original miles.
I had to cut the bolt off of the number 4 rear right body mount. I've bought a new one. Do I drill out the rivits of the bracket and replace the old with the new and then rerivit the bracket back to the body? Thanks, David....
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
2011111017209r.jpg)
Dave, that's what I would do. My question is, did you cut just the bolt or cut the bracket? corvette440hp 2008-11-09 12:10:28
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Former Member
Send PMEvansville`, IN - USA
Joined: 6/25/2007
Posts: 46
Vette(s): 1972 Convertible, ontario orange, ps/pb/pw/air conditioning and 31,000 original miles.
I was able to just cut the bolt. The bracket is OK.....thanks for the reply.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Best to replace the bracket. When you rivet the bracket back on use Aluminum rivets...the steel ones are too strong and will damage the fiberglass or you can use small bolts and nuts to fasten it back together.
John
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content